Easy Cleanout

Our competitors often have a burner tube in their wastewater tank which makes it very difficult to clean out the oil or sludge that is below it. Our wastewater tank is clear with no obstructions, making it very easy to clean. In some cases where there is only oil remaining after evaporating the wastewater, it can be pumped out to a waste oil tank and sold to a used oil reclaimer.

If your wastewater evaporates down to a dry solid or a sludge, we have an option that makes it even easier to clean the unit out – it is a sludge liftoff tray. This stainless tray is placed in the bottom of the evaporator before you start to fill it with the wastewater. Then during the RunDry™ evaporation process, the solids and sludge will settle to the bottom of the wastewater tank and land in the tray. Once your evaporation processing period is finished and the tank has RunDry™, the sludge tray can be lifted out of the evaporator and the sludge can be scraped off into a dumpster.

Leading the way in wastewater evaporation, we are at the forefront of innovation.

photo-easy-cleanout

1. RunDry Evaporator

photo-easy-cleanout

2. Remove Cover

photo-easy-cleanout

3. Lift Tray from Inside Unit

photo-easy-cleanout

4. Lower Spreader Bar Into Evaporator

photo-easy-cleanout

5. Lift Tray Out of Unit

photo-easy-cleanout

6. Remove Tray to Dump Solids